714E-DP-XEON Specifications.

Blade Enclosure:

ASL 7U Rack mount chassis with rail kit, FCC Class B
Up to fourteen (14) hot-plug computing nodes
   Note: The base configuration includes one computing node only

Up to two (2) hot-plug chassis management modules
   Remote management of computing nodes, power supplies, cooling fans and network switches
   KVM over LAN / KVM over IP
   Serial over LAN (SOL)
   Remote Power Control
   Command line tool and graphical management software (JAVA)

Up to two (2) hot-plug Gigabit Ethernet switch modules
   Fourteen (14) internal downlink ports for 1st LAN interface off the computing nodes
   Note: A second switch module is required for 2nd LAN interface off the computing nodes
   Ten (10) external uplink RJ-45 ports

One (1) hot-plug 4X DDR Infiniband switch module (optional)
   Mellanox InfiniScale III with 960Gbps bandwidth
   Fourteen (14) 4X DDR downlink ports
   Ten (10) 4X DDR CX4 uplink ports

Four (4) 1620W hotswap and redundant N+1 power supply modules, 93% efficiency
Eight (8) cooling fans

Dimensions: 12.1" (H) x 18.5" (W) x 29" (D)

Computing Node

Motherboard:
Supermicro B8DTE server board

CPU:
Intel Xeon 5500 series processors (Gainestown), 4x256MB L2 cache, 8MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Intel Xeon 5600 series processors (Westmere), 6x256MB L2 cache, 12MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Chipset:
Intel 5500 (Tylersburg) chipset
ICH10R 6-port SATA II controller with HostRAID1

Memory Subsystem:
Twelve 240-pin DIMM banks supporting up to 96GB DDR3 ECC registered memory, 6 memory slots per CPU bank, triple channel memory bus

   Note: Triple channel memory bus requires 3 modules installed per CPU bank.
   Note: Two processors are required to populate 9 or 12 memory modules.
   Note: Memory bus speed varies from 1066mhz or 1333mhz.

Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 8M display ram

Hard Disk Subsystem:
Up to three hot-plug Serial ATA II 2.5in hard drives. These drives can be configured as standalone unit or software RAID 0/1.

Network Subsystem:
Onboard Intel 82576 Dual-Port PCI-Express Gigabit controller, 1000BaseTX
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
Optional 4x QDR/DDR Infiniband mezzanine board

System Slots:
None

System I/O:
SUV (Serial/USB/Video) and KVM Connector

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
Phone: 1.877.ASL.3535