720E-DP2-XEON Specifications.

Blade Enclosure:

ASL 7U Rack mount chassis with rail kit, FCC Class B
Up to ten (10) hot-plug computing twin-nodes
   Note: The base configuration includes one computing twin-node only

One (1) hot-plug chassis management module
   Remote management of computing nodes, power supplies, cooling fans and network switches
   KVM over LAN / KVM over IP
   Serial over LAN (SOL)
   Remote Power Control
   Command line tool and graphical management software (JAVA)

Up to two (2) hot-plug Gigabit Ethernet switch modules
   Twenty (20) internal downlink 1Gbps ports for 1st LAN interface off the computing nodes
   Note: A second switch module is required for 2nd LAN interface off the computing nodes
   Two (2) external uplink 1Gbps RJ-45 ports
   Three (3) external uplink 10Gbps ports (2 CX4, 1 SFP+)

Up to two (2) hot-plug 4X QDR Infiniband switch modules (optional)
   Mellanox InfiniScale IV with 2.88Tbps bandwidth
   Twenty (20) 4X QDR downlink ports
   Sixteen (16) 4X QDR QSFP uplink ports

Four (4) 2500W hotswap and redundant N+1 power supply modules, 93% efficiency
Sixteen (16) cooling fans

Dimensions: 12.1" (H) x 18.5" (W) x 29" (D)

Computing Twin-Node

Motherboard:
Supermicro B8DTT server boards

CPU:
Intel Xeon 5500 series processors (Gainestown), 4x256MB L2 cache, 8MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366

Intel Xeon 5600 series processors (Westmere), 6x256MB L2 cache, 12MB L3 cache, 5.86GT/s or 6.4GT/s QuickPath Interconnect, Nehalem core, HyperThreading (SMT), Socket LGA1366


   Note: Only processor model with TDP rating of 95W or less is supported.

Chipset:
Intel 5500 (Tylersburg) chipset
ICH10R 6-port SATA II controller with HostRAID1

Memory Subsystem:
Eight 240-pin DIMM banks supporting up to 128GB DDR3 ECC registered memory, 4 memory slots per CPU bank, triple channel memory bus

   Note: Triple channel memory bus requires minimum of 3 modules installed per CPU bank.
   Note: Two processors are required to populate more than four memory modules.
   Note: Memory bus speed varies from 1066mhz or 1333mhz.

Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 8M display ram

Hard Disk Subsystem:
Up to two hot-plug Serial ATA II 2.5in hard drives. These drives can be configured as standalone unit or software RAID 0/1.

Network Subsystem:
Onboard Intel 82576 Dual-Port PCI-Express Gigabit controller, 1000BaseTX
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
Optional 4x QDR Infiniband mezzanine board

System Slots:
None

System I/O:
SUV (Serial/USB/Video) and KVM Connector

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
Phone: 1.877.ASL.3535