Lancelot 1165 Specifications.

Intel SE7221BK1-E motherboard and SR1425BK1-E server platform

Intel® Pentium® 4 processor, 1MB or 2MB full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, Socket 775, .09 micron, HyperThreading (SMT)

Intel E7221 server chipset with ICH6R SouthBridge
Single channel UltraDMA/100 bus mastering IDE controller
Four channel SATA150 controller on ICH6R South Bridge

Memory Subsystem:
Four DIMM banks supporting up to 3GB of DDR2-533 unbuffered SDRAM, non-ECC or ECC, single or dual channel operation

Note: To enable dual channel memory (128-bit), modules must be populated in pairs.

Graphic Subsystem:
Integrated Intel graphic accelerator with 8MB framebuffer

Hard Disk Subsystem:
Hitachi Desktar 7K250 80GB Serial ATA150 drive, 7200rpm, 8MB cache, 3 year warranty

ATA Subsystem:
Integrated single channel ATA/100 controller

SCSI Subsystem:
(1165-TR) 3Ware Escalade 9500S-4LP serial ATA150 controllers with special HD activity header, 64-bit/66mhz PCI

(1165-TR2) 3Ware Escalade 9550SX-4LP serial ATA300 controllers with special HD activity header, 64-bit/133mhz PCI-X

CD-ROM Subsystem:
(1165-TR2) Sony CRX850E-10 slim combo DVD/CDR reader, 8X DVDROM, 24X CDROM, 24X CDR, 24X CDRW, 2MB buffer, ATAPI

Sound Subsystem:

Network Subsystem:
Two integrated Intel 82541PI Gigabit Ethernet controller, 1000Base-TX

System Slots:
One (1) 64-bit/100MHz PCI-X slot (standard) or PCI-Express 8x slot (optional)

Note: Slot is used on the 1165-TR model.

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports (rear access)
One (1) USB 2.0 port (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 Ethernet ports

Floppy Drive:

Note: External floppy is supported via the USB port.



Intel SC1400UP 1U rack, 300W fixed power supply, FCC Class B
System status LEDS for power, system status, disk and network (NIC1 and NIC2) activity, and system identification
Dimensions: 1.70" (H) x 16.93" (W) x 26.4" (D)
(1865-T) Three (3) fixed SATA drive bays
(1865-TR) Three (3) hotswap SATA drive bays
(1865-S/SR) Three (3) hotswap SCSI drive bays (SCA-2)
Four (4) 40x40x28mm dual rotor fans, thermal control
One (1) 40x40x28mm single rotor fan, thermal control
Copper-based passive heatsink
Air Baffle for CPU/memory
Optional tool-less rail kit

Preinstalled Software:
32-bit or 64-bit Red Hat Linux with ASL optimized kernel

Phone: 1.877.ASL.3535