Lancelot 1172 Specifications.

Motherboard:
Intel Mukilteo Pentium D serverboard, proprietory form factor

CPU:
Intel® Pentium® D processor, 2M+2M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, Socket 775, .065 micron, dual core

Intel® Pentium® Extreme Edition processor, 2M+2M full speed L2 cache, 1066Mhz Quad Pumped FSB, NetBurst micro-architecture, Socket 775, .065 micron, HyperThreading (SMT), dual core

Chipset:
Intel E7230 server chipset with PXH-V I/O Bridge and ICH7R SouthBridge
Single channel UltraDMA/100 bus mastering IDE controller
Four channel SATAII controller on ICH7R South Bridge

Memory Subsystem:
Four DIMM banks supporting up to 8GB of DDR2-667 unbuffered SDRAM, non-ECC or ECC, single or dual channel operation

Note: To enable dual channel memory (128-bit), modules must be populated in pairs.

Graphic Subsystem:
Integrated ATI Rage XL graphic accelerator with 8MB

Hard Disk Subsystem:
Up to four Serial ATA hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (1172-T) or hardware RAID (1172-TR2)

ATA Subsystem:
Integrated single channel Ultra ATA/100 controller

SCSI Subsystem:
(1172-TR2) 3Ware Escalade 9550SX-4LP Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X, 128MB ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Slim 8X DVDROM reader

Sound Subsystem:
None

Network Subsystem:
Integrated Intel 82573 dual-port PCI-Express Gigabit Ethernet controller, 1000Base-TX
Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots:
One (1) 3.3V1 64-bit/133MHz bus mastering, full length PCI-X slot
One (1) 3.3V1 64-bit/100MHz bus mastering, full length PCI-X slot (installed) or PCI-Express x4 slot (not installed)
One (1) IPMI 2.0 slot

System I/O:
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
1.44MB floppy drive

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
Two (2) PSU slots2 with one 400W EPS12V module installed
Chassis and CPU overheat alarm with front LED indicator
Dimensions: 1.7" (H) x 16.7" (W) x 27" (D)
One (1) accessible slim size CDROM bay
One (1) accessible slim floppy drive bay
One (1) SAS backplane
Four (4) hotswap SATA hard drive bays
Three (3) 10K 40mm counter-rotating fans
Copper-based passive heatsink for the processor
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system

  1. Slot is incompatible with 5V PCI add-on card.
  2. The 2nd PSU module can be added to enable redundancy and hot swap capability.
Phone: 1.877.ASL.3535