Lancelot 1863 Specifications.

(1863-S) Supermicro X6DHR-8G2 motherboard
(1863-TR/TR2) Supermicro X6DHR-iG2 motherboard

Intel Xeon processors, Nocona core, 1M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Intel Xeon processors, Irwindale core, 2M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Intel E7520 Lindenhurst server chipset
Intel ICH5R Southbridge and PCI-X Hub (PXH)
Dual channel DDR2-400 support 6.4GB/s memory bandwidth
Dual channel SATA150 controller on ICH5R South Bridge

Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR2-400 ECC registered memory, single or dual channel memory access

Note: To enable dual channel memory (128-bit), modules must be populated in pairs.

Graphic Subsystem:
Integrated ATI Rage XL 8MB PCI

Hard Disk Subsystem:
(1863-S) Seagate Cheetah 10K.6 or 15K.3 Ultra 360/m SCSI hard drives, 5 year warranty

(1863-TR/TR2) Up to four Serial ATA150/300 hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or disk array(s) (level 0, 1, 5, 10, hotspare supported)

ATA Subsystem:
Integrated dual channel Ultra ATA/100 controllers

SCSI Subsystem:
(1863-S) Integrated Adaptec 7902W dual channel Ultra 320/m SCSI-3 PCI controllers, 64-bit/100mhz, up to 301 devices, one internal 68-pin Ultra 320/160/m/LVD/SE connector (channel A), one external 68-pin VHDCI Ultra 320/160/m/LVD/SCSI connector (channel B)

(1863-S) Optional Adaptec 2015S Zero Channel hardware-based Ultra 320/m SCSI RAID

(1863-TR) 3Ware Escalade 9500S-4LP serial ATA150 RAID controller, 4-port, 64-bit/66mhz

(1863-TR2) 3Ware Escalade 9550SX-4LP serial ATA300 RAID controller, 4-port, 64-bit/133mhz

CD-ROM Subsystem:
24X ATAPI slim CDROM reader

Sound Subsystem:

Network Subsystem:
Integrated Intel 82546GB Dual port Gigabit Server adapter, 1000BaseTX

Optional Intelligent Platform Management Interface (IPMI) board

System Slots:
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot (bus #1)
One (1) 3.3V2 64-bit/100MHz bus mastering, low profile PCI-X slot (bus #2)
One (1) IPMI 2.0 slot
(1863-S) One (1) Zero-channel SCSI RAID slot

System I/O:
One (1) RS-232C 16550 serial port, DB-9, rear access
One (1) RS-232C 16550 serial port, RJ-45, front access
Two (2) USB 2.0 ports, rear access
Two (2) USB 2.0 ports, front access
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
(1863-S) One (1) VHDCI SCSI port

Floppy Drive:
1.44MB floppy drive



ASL 1U Rack mount chassis, FCC Class B
500W coldswap power supply
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 16.7" (W) x 25" (D)
One (1) accessible slim size CDROM bay
One (1) accessible floppy bay
(1863-S) Ultra 320m SCA backplane, 1 SCSI channel of 4 drives, SAF-TE
(1863-TR/TR2) SATA backplane
Four (4) coldswap/hotswap3 drive bays
Two (2) 10cm heavy duty blower fans
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system

  1. External disk enclosure(s) are required.
  2. Slot is incompatible with 5V PCI add-on card.
  3. Hotswap requires a RAID controller.
Phone: 1.877.ASL.3535