Lancelot 1868 Specifications.

Motherboard:
Intel 5000P Blackford server board, E-ATX form factor

CPU:
Intel Dual Core Xeon processors (Woodcrest), 2M+2M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Intel Quad Core Xeon processors (Clovertown), 4M+4M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Chipset:
Intel 5000P Blackford server chipset
Intel ESB2 Enterprise Southbridge and PCI-X Hub (PXH-V)
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices

Memory Subsystem:
Twelve 240-pin DIMM banks supporting up to 48GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus

Note: For best performance, populate 4, 8, or 12 modules to enable quad channel memory access.

Graphic Subsystem:
Onboard ATI ES1000 VGA controller with 32M display ram

Hard Disk Subsystem:
Up to four SAS hard drives in capacity from 36GB to 300GB or four SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.

ATA Subsystem:
Onboard single channel Ultra ATA/100 controller

SCSI Subsystem:
Onboard LSI 1068 8-port PCI-X SAS controller

CD-ROM Subsystem:
8X slim DVD-ROM optical reader

Sound Subsystem:
None

Network Subsystem:
Two onboard Intel 82563EB PCI-Express Gigabit controllers, 1000BaseTX
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)

System Slots:
One (1) PCI-Express x8 slot, half-length (low profile card only)
One (1) 64-bit/100mhz PCI-X slot2, half length

System I/O:
One (1) RS-232C 16550 serial port (COM A)
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
Two (2) USB 2.0 ports (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
700W EPS12V cold swap power supply with active PFC
Optional redundant & hot swap power supply by adding a 2nd PSU module
Front panel LED and system ID locator
Dimensions: 43.4mm (H) x 444mm (W) x 686mm (D)
One (1) slim 5.25in peripheral drive bay (used)
SAS backplane supporting four hotswap hard drives
Five (5) 40x40x28mm system cooling fans with fan control
Two (2) 40x40x56mm (dual-fan) system cooling fans with fan control
Copper-based passive heatsinks and air baffle for the processors
Sliding rails kit (telco mounting not supported)
Power, LAN1, LAN2, System Fail, and System ID LED

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535