Lancelot 2846 Specifications.
Motherboard:
Intel Mukilteo Core 2 Duo Server board, ATX form factor
CPU:
Intel® Core® 2 Duo processor, 2M or 4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, dual core
Intel® Core® 2 Duo Extreme processor, 4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, dual core
Intel® Core® 2 Quad Extreme processor, 4M+4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, quad core
Chipset:
Intel 3000 (Mukilteo) server chipset with 6702 PXH-V I/O Bridge and ICH7R SouthBridge
Single channel UltraDMA/100 bus mastering IDE controller
Four channel SATAII controller on ICH7R South Bridge
Memory Subsystem:
Four DIMM banks supporting up to 8GB of DDR2-667 unbuffered ECC SDRAM, single or dual channel operation
Note: To enable dual channel memory (128-bit), modules must be populated in pairs.
Graphic Subsystem:
Onboard ATI ES1000 graphic accelerator with 32M video ram
Hard Disk Subsystem:
(2846-SS) Up to eight SAS hard drives in capacity from 36GB to 300GB or eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.
(2846-TR2) Up to eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or hardware RAID.
ATA Subsystem:
Onboard single channel Ultra ATA/100 controller
SCSI Subsystem:
(2846-SS) Onboard LSI 1068 8-port PCI-X SAS controller
(2846-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
8X slim DVD-ROM optical reader
Sound Subsystem:
None
Network Subsystem:
Onboard Broadcom BCM5721 PCI-Express Gigabit Ethernet controllers, 1000Base-TX
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)
System Slots: (low profile card only)
Two (2) 3.3V1 64-bit/133MHz bus mastering, full length PCI-X slot
One (1) PCI Express x16 slot (x8 link)
One (1) 3.3V1 32-bit/33mhz PCI slot
One (1) IPMI 2.0 slot
System I/O:
One (1) ECP/EPP Bi-directional parallel port
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
Two (2) USB 2.0 ports (front accessible)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
Optional
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 2U Rack mount chassis, FCC Class B
Copper-based CPU heatsinks (active cooling)
(2846-SS) 560W EPS12V fixed power supply with active PFC
(2846-TR2) 700W EPS12V hotswap and redundant power supply with active PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.5in (H) x 17.2in (W) x 25.6in (D)
One (1) accessible slim size CDROM bay (used)
One (1) accessible slim floppy bay
SAS backplane with enclosure management
Eight (8) hotswap hard drive bays
Three (3) 8cm hotswap chassis fans
Sliding rails kit with telco mount support
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system
- Slot is incompatible with 5V PCI add-on card.