Lancelot 4865 Specifications.

Motherboard:
Intel 5000P Blackford server board, E-ATX form factor

CPU:
Intel Dual Core Xeon processors (Woodcrest), 2M+2M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Intel Quad Core Xeon processors (Clovertown), 4M+4M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Chipset:
Intel 5000P Blackford server chipset
Intel ESB2 Enterprise Southbridge and PCI-X Hub (PXH-V)
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices

Memory Subsystem:
Eight 240-pin DIMM banks supporting up to 32GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus

Note: Memory modules must be populated in pairs.

Graphic Subsystem:
Onboard ATI ES1000 VGA controller with 16M display ram

Hard Disk Subsystem:
(4865-S/SR) Up to eight Ultra 320/m hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (4865-S) or hardware RAID (4865-SR)

(4865-T/TR2) Up to eight Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (4865-T) or hardware RAID (4865-TR2)

ATA Subsystem:
Onboard single channel Ultra ATA/100 controller

SCSI Subsystem:
(4865-SR) LSI Logic MegaRAID 320-2E dual channel Ultra 320/m SCSI RAID controller, PCI-Express x8, 128MB ECC cache, optional Battery Backup Unit (BBU)

(4865-S) Onboard Adaptec 7902W dual channel Ultra 320/m SCSI controller, 64-bit/100mhz PCI-X

(4865-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

(4865-T) Eight-port Serial ATA II controller, 64-bit/133mhz PCI-X, Marvell 88SX6081 chipset

CD-ROM Subsystem:
Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive

Sound Subsystem:
None

Network Subsystem:
Onboard Intel 82563EB (Gilgal) Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots:
One (1) 3.3V2 64-bit/100MHz PCI-X slot, PCI-X bus #1 (share with onboard SCSI on 4865-S)
One (1) 3.3V2 64-bit/133MHz PCI-X slot, PCI-X bus #2
One (1) 3.3V2 64-bit/133MHz PCI-X slot, PCI-X bus #3
Two (2) PCI Express x8 slots
One (1) PCI Express x8 slot with x4 signal

System I/O:
One (1) RS-232C 16550 serial port (rear access, COM A)
One (1) ECP/EPP Bi-directional parallel port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
Optional

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 4U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
(4865-S/T) 800W EPS12V cold swap power supply with active PFC
(4865-SR/TR2) 800W EPS12V hotswap and redundant power supply with active PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 7.0" (H) x 17.2" (W) x 25.5" (D)
Three (3) accessible 5.25" drive bays
(4865 -S/SR) Ultra 320/m SCA backplane

  • Two SCSI channels with four drives per channel
  • SAF-TE controller for RAID management
  • Eight (8) hotswap SCA-2 (80-pin) hard drive bays
(4865-T/TR2) Serial ATA II/SAS backplane with enclosure management
  • Eight (8) hotswap Serial ATA hard drive bays

Three (3) 9cm hotswap center fans, double ball bearing
Two (2) 8cm hotswap exhaust fans, double ball bearing
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535