Monarch 8220 Specifications.

Motherboard:
AMD Dual Opteron server motherboard, E-ATX form factor

CPU:
AMD® Opteron® Model 2XX processors, .13 or .09 micron, 1M L2 cache, Socket 940, single core
AMD® Opteron® Model 26X/27X processors, .09 micron, 2M1 L2 cache, Socket 940, dual core
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
AMD-8111 HyperTransport I/O Hub
AMD-8131 HyperTransport PCI-X Tunnel
Dual channel UltraDMA/133 bus mastering IDE controllers

Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR400 or 32GB DDR333 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 11.4 GB/s (DDR333) or 12.8 GB/s (DDR400) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.

Graphic Subsystem:
Onboard ATI Rage XL with 8MB

Hard Disk Subsystem:
(8220-S/SR) Up to six Ultra 320/m hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s), level 0, 1, 5, 10, hotspare supported

(8220-T/TR2) Up to six Serial ATA hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or disk array(s), level 0, 1, 5, 10, hotspare supported

SCSI Subsystem:
(8220-S) Onboard Adaptec 7902W dual channel Ultra 320/m SCSI controller, 64-bit/100mhz PCI-X

(8220-SR) LSI Logic MegaRAID 320-1LP single channel Ultra 320/m SCSI RAID controller, 64-bit/66mhz, 64MB ECC cache, optional Battery Backup Unit (BBU)

(8220-T) Eight-port Serial ATA II controller with special HD activity header, 64-bit/133mhz PCI-X, Marvell 88SX6081 chipset

(8220-TR2) 3Ware Escalade 9550SX-8LP eight-port Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X, 128Mb ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
(8220-SR/TR2) 24X Ultra DMA/33 slim CDROM

(8220-S/T) Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive

Sound Subsystem:
None

Network Subsystem:
Two onboard Broadcom BMC5704C 10/100/1000Mbps Gigabit Ethernet adapters
Optional Intelligent Platform Management Interface

System Slots: (low profile only)
Four (4) 64-bit/100MHz bus mastering PCI-X slots2
Two (2) 32-bit/33MHz bus mastering PCI slots
One (1) IPMI slot

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 1.1 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
One (1) DB-15 VGA port

Floppy Drive:
1.44M 3.5-inch drive

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 2U Rack mount chassis, FCC Class B
(8220-S/T) 550W fixed power supply with redundant cooling
(8220-SR/TR2) 500W hotswap and redundant power supply
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.5" (H) x 16.7" (W) x 26" (D)
One (1) accessible slim size CDROM bay
One (1) accessible floppy bay
One (1) accessible 5.25" drive bay
(2860-S/SR) Ultra 320/m SCA backplane

  • 1 SCSI channel of 6 drives
  • SAF-TE controller for RAID management
  • Six (6) hotswap SCA-2 1" hard drive bays

(8220-T/TR2) Serial ATA II backplane with special HD activity header

  • Six (6) coldswap/hotswap Serial ATA drive bays

Four (4) 8cm hotswap fans
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. Each processor core has 1M L2 cache.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535