Monarch 9416 Specifications.
Motherboard:
nVidia nForce Pro 3600 Quad Opteron motherboard, WTX form factor
CPU:
AMD® Dual Core Opteron® Model 8000 processors, .09 micron, 1M+1M L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions
Chipset:
nVidia® nForce Pro 3600 (MCP55 Pro) chipset
AMD® 8132 HyperTransport PCI-X I/O Tunnel
Single channel UltraDMA/133 bus mastering IDE controller
Memory Subsystem:
Sixteen DIMM banks supporting up to 32GB DDR2-667 or 64GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 42.8 GB/s (DDR2-667) or 33.6 GB/s (DDR2-533) accumulated memory bandwidth
Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of two modules are required per processor.
Graphic Subsystem:
Onboard ATI ES1000 VGA with 16M video ram
Hard Disk Subsystem:
Up to 16 Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or hardware RAID, level 0, 1, 5, 10, hotspare supported
SCSI Subsystem:
Onboard MCP55 Pro 6-port Serial ATA II controller
One 3Ware Escalade 9650SE-16ML Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, PCI-Expess x4, 256MB ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
Slim 8X DVD recorder, 8X DVD+-R, 4X DVD+-RW, 4X DVD+R DL, 24X CD, 24X CDRW, 8X DVDROM
Sound Subsystem:
None
Network Subsystem:
Onboard dual Intel 82546EB 10/100/1000Mbps PCI-X Gigabit Ethernet controllers
Onboard Intelligent Platform Management Interface (IPMI 2.0) board
System Slots:
One (1) PCI-Express x16 slot (PCI-E video card unsupported)
One (1) PCI-Express x8 slot
Two (2) 64-bit/100 bus mastering PCI-X slots
Two (2) 64-bit/133MHz bus mastering PCI-X slots
System I/O:
One (1) RS-232C 16550 serial port
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) 15-pin VGA port
Two (2) RJ-45 ports
Floppy Drive:
1.44MB floppy drive
Mouse:
Optional
Keyboard:
Optional
Chassis:
4U Rack mount chassis with rail kit, FCC Class B
Dimensions: 27in (D) x 19in (W) x 7in (H)
1350W 3+1 hotswap and triple redundant EPS12V power supply
One (1) accessible floppy bay (used)
One (1) accessible slim 5.25" drive bay (used)
One (1) accessible regular 5.25" drive bay
Four Multi-lane SAS backplanes
- Activity LED connector for each hard drive
- Sixteen (16) hotswap SATA 1" hard drive bays
Five (5) 8cm hotswap cooling fans
Copper CPU heatsinks with active cooling fans
Sliding rails kit
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit edition