Monarch 9428 Specifications.
Motherboard:
nVidia nForce Pro 3600 Quad Opteron motherboard, WTX form factor
CPU:
AMD® 4-core Opteron® Model 8300 processors, Shanghai, 45nm, 4x512K L2 cache, Socket F
AMD® 6-core Opteron® Model 8400 processors, Istanbul, 45nm, 6x512K L2 cache, Socket F
Chipset:
nVidia® nForce Pro 3600 (MCP55 Pro) and IO55 chipsets
NEC uPD720400 PCI-X I/O Bridge
Single channel UltraDMA/133 bus mastering IDE controller
Memory Subsystem:
Thirty two DIMM banks supporting up to 128GB DDR2-800 or 256GB DDR2-533 ECC registered SDRAM memory.
Dual channel (128-bit) memory bus supporting 51.2GB/s (DDR2-800) or 33.6GB/s (DDR2-533) accumulated memory bandwidth.
Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: If 6 or 8 modules are installed per CPU socket, the memory bus will be reduced to 533mhz.
Graphic Subsystem:
Onboard ATI ES1000 VGA with 16M video ram
Hard Disk Subsystem:
(9428-SS) Up to six SAS hard drives in capacity from 36GB to 300GB or six SATA drives in capacity from 80GB to 2TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.
(9428-TR2) Up to six Serial ATA II hard drives in capacity from 80GB to 2TB. These drives can be configured as hardware RAID with level 0, 1, 5, 6, 10, and hotspare supported
SCSI Subsystem:
Onboard MCP55 Pro 6-port Serial ATA II controller
(9428-SS) Onboard LSI 1068 8-port PCI-X SAS controller
(9428-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
Built-in 8X slim DVDROM reader
Sound Subsystem:
None
Network Subsystem:
Two onboard Intel 82546GB PCI-X Gigabit controllers, 1000BaseTX
SIMLC Remote Server Management board, IPMI 2.0
System Slots: (low profile card only)
Two (2) PCI-Express x16 expansion slots
One (1) PCI-Express x8 expansion slot
One (1) PCI-Express x4 expansion slot
One (1) IPMI slot (used)
System I/O:
One (1) RS-232C 16550 serial port
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) USB 2.0 ports
One (1) 15-pin VGA port
Two (2) RJ-45 ports
Floppy Drive:
None
Mouse:
Optional
Keyboard:
Optional
Chassis:
2U Rack mount chassis with rail kit, FCC Class B
Dimensions: 1.7" (H) x 17.2" (W) x 25.6" (D)
1200W redundant & hotswap power supply with PFC
One (1) accessible slim 5.25" drive bay (used)
SAS backplane supporting six hotswap hard drives
Six (6) hotswap 80mm high speed chassis fans
Passive CPU heatsinks and air baffle
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit edition