Omega 9228 Specifications.

Four Supermicro H8DGT-HiBQF server boards

AMD® Opteron® Model 6300 processors (Piledriver), 3.2ghz Hyper-Transport (HT3) Link, 32nm, Socket G34
AMD® Opteron® Model 6200 processors (Interlagos), 3.2ghz Hyper-Transport (HT3) Link, 45nm, Socket G34

AMD SR5670 and SP5100 chipsets

Memory Subsystem: (per node)
Sixteen DIMM banks supporting up to 256GB DDR3-1600mhz ECC registered SDRAM memory, Quad-Channel memory bus

Note: Two processors are required to populate more than 8 memory modules.

Graphic Subsystem:
Onboard Matrox G200 with 16MB DDR2 display ram

Hard Disk Subsystem: (per node)
Up to three 3.5in SATA hard drives. These drives can be configured as standalone (JOBD) or software RAID

SCSI Subsystem:
Onboard SP5100 6-port Serial ATA II controller

CD-ROM Subsystem:

Sound Subsystem:

Network Subsystem: (per node)
Onboard single-port Mellanox MT26428 ConnectX QDR Infiniband controller, 40Gbps
Onboard dual-port Intel 82576 PCI-Express Gigabit Ethernet Server adapter
Onboard in-band and out-of-band remote server management (IPMI 2.0+KVM) with dedicated LAN port

System Slots: (per node)
One (1) PCI-Express x16 v2.0 slot (low profile, half-length)

System I/O: (per node)
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) 15-pin VGA port
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
One (1) QSFP port (Infiniband)

Floppy Drive:



ASL 2U Rack mount chassis, FCC Class B
Copper-based CPU heatsinks (passive design)
1400W EPS12V redundant & hotswap power supply, 80Plus efficiency
Dimensions: 3.47" (H) x 17.25" (W) x 28.5" (D)
One (1) accessible 5.25" slim CD bay (used)
Twelve (12) hotswap hard drive bays (3 per node)
Four (4) 80mm hotswap chassis fans
Tool-less sliding rails kit with quick release (require cabinet with square holes)

Preinstalled Software:
Fedora or CentOS, 64-bit operating system
Phone: 1.877.ASL.3535