Sovereign 3860 Specifications.

Motherboard:
Supermicro X6DHE-XG2 motherboard

CPU:
Intel Xeon processors, Nocona core, 1M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Intel Xeon processors, Irwindale core, 2M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Chipset:
Intel E7520 Lindenhurst server chipset
Intel ICH5R Southbridge and PCI-X Hub (PXH)
Dual channel DDR2-400 support 6.4GB/s memory bandwidth
Dual channel UltraDMA/100 bus mastering IDE controllers
Dual channel Serial ATA controller on ICH5R1 South Bridge

Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR2-400 ECC registered memory, single or dual channel memory access

Note: To enable dual channel memory (128-bit), modules must be populated in pairs.

Graphic Subsystem:
Integrated ATI Rage XL 8MB
Optional Nvidia GeForce/Quadro PCI-Express video card with OpenGL acceleration and multi-head displays

Hard Disk Subsystem:
(3860-SR) Up to fourteen Ultra 320/m hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s), level 0, 1, 5, 10, hotspare supported

(3860-T/TR/TR2/TRH) Up to fifteen Serial ATA hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or software RAID (3860-T) or hardware RAID (3860-TR/TR2/TRH), level 0, 1, 5, 10, hotspare supported

Note: On the Sovereign 3860-T, one hard drive is designated for the operating system. This is the only bootable drive.

ATA Subsystem:
Integrated dual channel Ultra ATA/100 controllers

SCSI Subsystem:
(3860-T) Two Marvell 88SX6081 64-bit/133mhz PCI-X Serial ATA II4 controllers

(3860-SR) LSI Logic MegaRAID 320-2X dual channel Ultra 320/m SCSI RAID controller, 64-bit/133mhz PCI-X, 128MB ECC cache, optional Battery Backup Unit (BBU)

(3860-TR) Two 3Ware Escalade 9500S-8 Serial ATA RAID controllers, RAID level 0, 1, 5, 10 & JBOD, 64-bit/66mhz PCI, 128MB ECC cache, optional Battery Backup Unit (BBU)

(3860-TR2) Two 3Ware Escalade 9550SX-8LP Serial ATA II RAID controllers, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X, 128MB ECC cache, optional Battery Backup Unit (BBU)

(3860-TRH) Two HighPoint RocketRAID 1820A (v1.2) eight-port Serial ATA RAID controllers, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X

CD-ROM Subsystem:
None

Sound Subsystem:
None

Network Subsystem:
Integrated Intel 82546GB Dual port Gigabit Ethernet controller, 1000BaseTX, RJ-45

Optional Intelligent Platform Management Interface (IPMI 2.0) board3

System Slots:
Two (2) 3.3V2 64-bit/100MHz bus mastering, full length PCI-X slots, PCI-X bus #1
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #2 (share with Gig LAN)
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #3
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #4
One (1) PCI Express x8 slot

System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 3U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
760W hotswap and triple redundant power supply
Chassis and CPU overheat alarm with front LED indication
Dimensions: 5.1" (H) x 17.1" (W) x 25.5" (D)
(3860-SR) Ultra 320/m SCA backplane

  • 2 SCSI channels of 7 drives each
  • SAF-TE controller for RAID management
  • Fourteen (14) hotswap SCA-2 1" hard drive bays

(3860-T/TR/TR2/TRH) SATA backplane

  • Activity LED connector for each hard drive
  • Fifteen (15) hotswap SATA 1" hard drive bays

Four (4) 9cm hotswap centered fans, double ball bearing
Two (2) 8cm hotswap rear fans, double ball bearing
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
  3. An external USB floppy drive is required to configure IPMI LAN address.
  4. Servers shipped prior to 4/06/05 are configured with the Marvell 88SX5081 Serial ATA controller
Phone: 1.877.ASL.3535