Sovereign 4992 Specifications.


Supermicro H8DGi-F server board, E-ATX form factor


Two AMD® Opteron® Model 6300 processors (Piledriver), 3.2ghz Hyper-Transport (HT3) Link, 32nm, Socket G34

Two AMD® Opteron® Model 6200 processors (Interlagos), 3.2ghz Hyper-Transport (HT3) Link, 32nm, Socket G34


AMD SR5690 chipset and SP5100 southbridge

Memory Subsystem:

Sixteen (16) 240-pin DIMM banks supporting up to 256GB DDR3-1600 ECC registered memory, 8 memory slots per CPU bank, Quad channel memory bus

Note: Quad channel memory bus requires 4 or 8 modules installed per CPU bank.
Note: Two processors are required to populate more than 8 memory modules.

Graphic Subsystem:

Onboard Matrox G200eW VGA controller with 16M display ram

Hard Disk Subsystem:

Up to twenty-four (24) SATA or SAS 3.5in hard drives. These drives can be configured as standalone units or hardware RAID.
Note: Using SAS and SATA drives together is an unsupported configuration.

Storage Controllers:

Onboard SP5100 6-port SATA 3Gbs controller
3Ware Escalade 9750-4i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:


Sound Subsystem:


Network Subsystem:

Two onboard Intel 82576 PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

System Slots:

Three (3) PCI Express x16 (v2.0) slots
One (1) PCI Express x8 (v2.0) slot
Two (2) PCI Express x8 (v2.0) slots, x4 signal

System I/O:

One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)






ASL 4U Rack mount chassis, FCC Class B
Chassis and CPU overheat alarm with front LED indication
Air Shroud and copper-based CPU heatsinks (passive design)
920W EPS12V redundant & hotswap power supply, 80Plus Platinum Level, 94% efficiency
Dimensions: 7" (H) x 17.2" (W) x 26" (D)
One (1) SAS2 backplane with single LSI SAS2X28 expander
Twenty-four (24) 3.5in hotswap hard drive bays (front access)
(Optional) Two (2) 2.5in hotswap hard drive bays (rear access)
Five (5) 8cm hotswap cooling fans
Sliding rail kit

Preinstalled Software:

Fedora, Ubuntu or CentOS 64-bit operating system

Phone: 1.877.ASL.3535