ASUS KMPG-D32 Dual Epyc 7003 server board
Two AMD Epyc processors, up to 64 cores, Socket SP3 (LGA 4094)
AMD Epyc System on Chip (SOC)
Thirty two (32) 240-pin DIMM banks supporting up to 8TB DDR4-3200 ECC registered memory, 16 memory slots per CPU bank, Eight channel memory bus
BMC (IPMI) integrated Aspeed AST2600 VGA (DB-15)
Up to eight Nvidia Tesla/GeForce RTX GPU accelerators
(GSR) Up to eight (8) SATA or SAS 3.5in hard drives. These drives can be configured as hardware RAID.
(GSS) Up to eight (8) SATA or SAS 3.5in hard drives. These drives can be configured as software RAID.
Two (2) M.2 NVMe PCIe 3.0 x4 ports
(GSS) ASUS PIKE II 3008-8i SAS3/SATA 12Gbps HBA controller, Broadcom 3008, PCI-E x8 Gen3
(GSR) ASUS PIKE II 3108-8i SAS3/SATA 12Gbps RAID controller, Broadcom 3108, RAID level 0, 1, 5, 6, 10, PCI-E x8 Gen3
None
None
Onboard Intel X550-AT2 Dual-port PCI-Express 10Gigabit Ethernet controller, 10GBase-T, RJ-45
Onboard in-band and out-of-band remote server management (IPMI 2.0+KVM) with dedicated LAN port
Ten (10) PCI Express x16 (v4.0) slots
One (1) PCI Express x8 (v4.0) slot
One (1) RS-232C 16550 serial port (front)
Two (2) USB 3.0 port Type As (front)
One (1) DB-15 VGA port (front)
Two (2) RJ-45 Ethernet ports (rear)
One (1) RJ-45 Ethernet port (rear,management)
Optional
Optional
ASL 4U Rack mount chassis, FCC Class B
Chassis and CPU overheat alarm with front LED indication
Air Shroud and copper-based CPU heatsinks (passive design)
2200W EPS12V redundant & hotswap power supply, Platinum Level, 94% efficiency
Dimensions: 7" (H) x 17.32" (W) x 31.5" (D)
SAS3 backplane with SES2 enclosure management
Eight (8) 3.5in hotswap hard drive bays
(GPU Cooling) Four (4) 8cm hotswap center fans
(CPU Cooling) Four (4) 4cm intake fans
Sliding rail kit
Ubuntu, CentOS or Rocky Linux 64-bit operating system