Supermicro H12DSi-NT6 server board, E-ATX form factor
Two AMD Epyc processors, up to 64 cores, Socket SP3 (LGA 4094)
AMD Epyc System on Chip (SOC)
Sixteen (16) 240-pin DIMM banks supporting up to 4TB DDR4-3200 ECC registered memory, 8 memory slots per CPU bank, Eight channel memory bus
Note: Two processors are required to populate more than 8 memory modules.
BMC (IPMI) integrated Aspeed AST2600 VGA (DB-15)
(TT) Up to eight (8) SATA 3.5in hard drives. These drives can be configured as software RAID.
(SRT) Up to eight (8) SATA or SAS 3.5in hard drives. These drives can be configured as hardware RAID.
Onboard 10-port SATA3 6Gbs controller
Two (2) PCIe 4.0 x8 SlimSAS ports supporting four NVMe U.2 drives
One (1) M.2 NVMe x4 port
(SRT) Broadcom 9361-8i SAS3/SATA 12Gbps RAID controller, Broadcom 3108, RAID level 0, 1, 5, 6, 10, PCI-E x8 Gen3
24X DVD+-RW dual layer optical burner
None
Onboard Broadcom BCM57416 Dual-port PCI-Express 10Gigabit Ethernet controller, 10GBase-T, RJ-45
Onboard in-band and out-of-band remote server management (IPMI 2.0+KVM) with dedicated LAN port
Three (3) PCI Express x16 (v4.0) slots
Three (3) PCI Express x8 (v4.0) slots
Slot 1 (x8) and slot 2 (x16) require the 2nd processor
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
Two (2) USB 3.0 ports
One (1) DB-15 VGA port
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (Management)
Optional
Optional
ASL Pedestal Tower chassis, FCC Class B
Chassis and CPU overheat alarm with front LED indication
Air Shroud and copper-based CPU heatsinks (passive design)
1280W EPS12V redundant & hotswap power supply, Platinum Level, 95% efficiency
Dimensions: 7.0" (H) x 17.8" (W) x 25.5" (D)
Three (3) 5.25in expansion drive bays
SAS3 backplane with SES2 enclosure management
Eight (8) 3.5in hotswap hard drive bays
Three (3) 8cm hotswap centered, 4-pin PWM fans
Two (2) 8cm hotswap rear, 4-pin PWM fans
Optional sliding rail kit
Ubuntu, CentOS or Rocky Linux 64-bit operating system