Lancelot 4200 Specifications.

Intel 7300 Clarksboro server board, WTX form factor

Intel Quad-Core Xeon MP processors, 4M/6M/8M full speed L2 cache, 1066MHz Quad Pumped FSB, Core 2 micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Intel 7300 Clarksboro server chipset
Intel 6700PXH PCI-X I/O Hub
Intel ESB2 Enterprise Southbridge
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices

Memory Subsystem:
Twenty four 240-pin DIMM banks supporting up to 96GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus

Note: For best performance, populate modules in group of four to enable quad channel memory access.

Graphic Subsystem:
Onboard ATI ES1000 VGA controller with 32M display ram

Hard Disk Subsystem:
(4200-SS) Up to six SAS hard drives in capacity from 36GB to 300GB or eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.

(4200-TR2) Up to six SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or hardware RAID.

ATA Subsystem:
Onboard single channel Ultra ATA/100 controller

SCSI Subsystem:
(4200-SS) Onboard LSI 1068 8-port PCI-X SAS controller
(4200-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
8X slim DVD-ROM optical reader

Sound Subsystem:

Network Subsystem:
Onboard Intel 82575EB Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots: (support low profile card only)
One (1) 3.3V2 64-bit/133MHz PCI-X slot
One (1) PCI Express x8 slot (x4 link)
One (1) PCI Express x8 slot (x8 link)
One (1) PCI Express x16 slot (x8 link)

System I/O:
One (1) RS-232C 16550 serial port (front access)
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:



ASL 2U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
1200W EPS12V hotswap and redundant power supply with active PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.5in (H) x 17.2in (W) x 27.75in (D)
One (1) accessible slim size CDROM bay (used)
SAS backplane with enclosure management
Six (6) hotswap 3.5in hard drive bays
Six (6) 8cm hotswap chassis fans
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535