Omega 1920 Specifications.

Nvidia nForce Pro 3600 Dual Opteron server platform

AMD® Dual Core Opteron® Model 2000 processors, 90nm, 2x1M L2 cache, Socket F
AMD® Quad Core Opteron® Model 2300 processors, 65nm/45nm, 4x512K L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Nvidia nForce Pro 3600 HyperTransport I/O Hub
Single channel UltraDMA/133 bus mastering IDE controller

Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR2-667 or 32GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 21.4 GB/s (DDR2-667) or 16.8 GB/s (DDR2-533) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.

Graphic Subsystem:
Onboard ATI ES1000 with 32MB display ram

Hard Disk Subsystem:
Up to eight SAS hard drives in capacity from 36GB to 300GB or eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID. Note: Using SAS and SATA drives together is an unsupported configuration.

SCSI Subsystem:
Onboard LSI 1068 8-port PCI-X SAS controller

CD-ROM Subsystem:
8X slim DVD-ROM optical reader

Sound Subsystem:

Network Subsystem:
Two onboard Broadcom 5721 PCI-Express Gigabit controllers, 1000BaseTX
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)

System Slots:
One (1) PCI-Express x16 slot (x16 width), half-length
One (1) 64-bit/100mhz PCI-X slot, half length

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports (rear panel)
Two (2) USB 2.0 ports (front panel)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:



ASL 1U Rack mount chassis, FCC Class B
700W EPS12V cold swap power supply with PFC
Optional redundant & hot swap power supply by adding a 2nd PSU module
Front panel LED and system ID locator
Dimensions: 43.4mm (H) x 444mm (W) x 686mm (D)
One (1) slim 5.25in peripheral drive bay (used)
SAS backplane supporting four hotswap hard drives
Five (5) 40x40x28mm system cooling fans with fan control
Two (2) 40x40x56mm (dual-fan) system cooling fans with fan control
Copper-based passive heatsinks and air baffle for the processors
Sliding rails kit (telco mounting not supported)
Power, LAN1, LAN2, System Fail, and System ID LED

Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel

Phone: 1.877.ASL.3535