Sovereign 4980 Specifications.

Supermicro H8DIi+-F server board, E-ATX form factor

AMD® 4-core Opteron® Model 2300 processors, Shanghai, 45nm, 4x512K L2 cache, Socket F
AMD® 6-core Opteron® Model 2400 processors, Istanbul, 45nm, 6x512K L2 cache, Socket F

AMD SR5690 chipset and SP5100 southbridge
SP5100 6-port SATA II controller

Memory Subsystem:
Sixteen DIMM banks supporting up to 64GB DDR2-800 or 128GB DDR2-533 ECC registered SDRAM memory. Dual channel (128-bit) memory bus supporting 25.6GB/s (DDR2-800) or 16.8GB/s (DDR2-533) accumulated memory bandwidth.

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: If 6 or 8 modules are installed per CPU socket, the memory bus will be reduced to 533mhz.

Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 16M display ram

Hard Disk Subsystem:s
Up to twenty four Serial ATA hard drives in capacity from 250GB to 2TB. These drives can be configured as standalone unit or hardware RAID array(s) (Level 0, 1, 5, 6, 10)

Up to two Serial ATA 2.5in hard drives for the OS. These drives can be configured as standalone unit or software RAID (Level 0 or 1)

ATA Subsystem:

SCSI Subsystem:
One 3Ware Escalade 9650SE-24M8 Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Expess x8, 256MB ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Slim 8X DVD+-RW dual layer optical writer

Sound Subsystem:

Network Subsystem:
Two onboard Intel 82574L PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

System Slots:
Three (3) PCI Express x16 (v2.0) slots (x8 signals)
One (1) PCI Express x8 (v2.0) slot
One (1) PCI Express x8 (v2.0) slot (x4 signals)
Two (2) 100/133MHz PCI-X slots, 3.3V

System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)

Floppy Drive:



ASL 4U Rack mount chassis, FCC Class B
Copper-based active CPU heatsinks
1010W hotswap and redundant EPS12V power supply
Dimensions: 7" (H) x 19" (W) x 27.5" (D)
Six (6) Multi-lane SAS backplanes
Twenty four (24) hotswap 3.5in hard drive bays
Two (2) hotswap 2.5in hard drive bays (rear access)
One (1) slim optical drive bay (rear access)
Three (3) 120mm hotswap chassis fans
Sliding rails kit

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

Phone: 1.877.ASL.3535